Part #
S70015K
S70016K
Ratio
1.5:1
1.6:1
Price
$733.95
$740.25
Big Block Mopar V8
Fits
59-78 "B" & "RB" 350-440
Edlebrock Performer RPM
Indy SR
When ordering pcs. we need to know the ratio and if the rocker is a left or right. To determine if it's a left or right. Hold the rocker flat side up roller towards you. Look at the rocker and the side of the adjusting screw hole will tell you if it's a left or right. This applies to all Harland Sharp Rockers.
Part #
L70015-1
L70016-1
R70015-1
R70016-1
Ratio
1.5:1
1.6:1
1.5:1
1.6:1
Price
$34.13
$34.65
$34.13
$34.65
Sets
Special Notes:
* Needle bearings allow for more oil flow to the rockers.
* Oil restrictors may be necessary to maintain oil pressure.
* Kits Work with stock covers up to .500 lift, must remove oil baffles.
Harland Sharp needle bearing, single shaft mount, rockers for Big Block Chrysler are like no other on the market. The
only shaft rocker of this style to feature heavy duty needle bearing fulcrums matched with specially heat treated, heavy
wall, rocker shafts. Harland Sharp Mopar kits are designed for extreme applications with valve springs up to 1.650 diameter and .900 lift cams. The 7/16-20 x 5/16 ball adjusters are designed for use with the factory style pushrods, length to be determined after you have rockers installed. Kits include rocker arms, shafts, spacers, hold down clamps, adjusters and nuts. See our instruction link for replacement and service parts #s.
If you don't see what you are looking for Harland Sharp will custom make it for you. This includes custom ratio's, offsets and even custom rockers when necessary. Contact our customer service department for details at 440.238.3260.
