Part #
S40046A
SH40046A
Ratio
1.6:1
1.6:1
Price
$471.45
$666.75
amc v8
Fits
1974 to 1991 290-401 AMC V8
AMC JEEP INLINE
Fits
1987 to 2005 Jeep 4.0L Inline 6
Oldsmobile v8
Fits
1964 to 1990 260-455 Oldsmobile V8
Sets
Sets
Sets
Part #
S40196
S40196A
Ratio
1.6:1
1.6:1
Price
$397.95
$450.45
Part #
S50026A
SH50026A
Ratio
1.6:1
1.6:1
Price
$471.45
$666.75
Special Notes:
* Harland Sharp original series, pedestal mount, Jeep 4.0L Inline 6, roller rockers are designed to be a replacement for the factory rocker that fits under the stock valve cover. Simply remove the factory rockers and rocker stands and replace with your new Harland Sharp roller rockers.
* We recommend always checking for head & valve cover clearance and proper lifter preload
* These non-adjustable rockers are designed to the factory specs. If you change camshafts or machine the heads, you will have to correct your pushrod length. Always check before installing.
Special Notes:
* These Heavy Duty, Pedestal Mount, roller rockers are designed to replace the factory style rocker system, without machine work
* This rocker system features Cage guided needle bearings, 3/4 diameter rocker shafts, 7/16 internal oil adjusters and all the necessary hardware for a complete install.
If you changed camshafts or machined the block and heads you may have to change your pushrod length, always check before installing
* This rocker system is capable of handling 350lbs. of open pressure before the 5/16 bolt will fail. If you are running an application beyond this, It is recommended you install 7/16 rocker studs and guide plates. And use our S5001 Oldsmobile rocker setup.
Special Notes:
* This rocker system features Cage guided needle bearings, 3/4 diamerter rocker shafts, 7/16 internal oil adjusters and all the necessary hardware for a complete install. If you changed camshafts or machined the block and heads you may have to change your pushrod length, always check before installing
* Designed to replace the factory style rocker system, without machine work
* This rocker system is capable of handling 350lbs. of open pressure before the 5/16 bolt will fail, If you are running an application beyond this, It is recommended you install 7/16 rocker studs and guide plates. And use our S4004-7 AMC rocker setup
